热卖中的镁阳极-镁阳极
铝热焊的文字说明
1、首先要把管道的防腐层破坏一块,和铝热模具大小一样的长方形口
2、把镁阳极包上面的电缆线放在铝热焊模具下面的缺口处，在把模具放在管道上，模具盖打开能看到电缆，将小铁片碗形朝上放在模具底部
3、焊接分大包小包，先倒大包焊剂，在把小的引火粉均匀的倒在上面，顺便在模具点火口的边沿到点，然后把模具盖盖住
4、用点火枪在磨具口点火，（点火时注意带手套，脸不要直视点火口，用钳子压住模具盖）瞬间点燃，电缆线与管道焊接成一个铜疙瘩，焊接的非常牢固rj20985551
5、然后用补伤棒将伤口填平
6、用火加热补伤片，让补伤片紧贴上口，将伤口补住...
热卖中的镁阳极-镁阳极
7、Two, magnesium anode and pipe welding
8、Description of thermit welding
9、1, first of all, destroy the anticorrosion layer of the pipeline, the same rectangle as the size of the aluminum hot mold.
10、2. The cable above the magnesium anode is placed under the gap under the aluminum heat welding mold. The mold is placed on the pipe. The die cover opens to see the cable, and the small iron sheet is placed upwards in the bottom of the mold.
11、3, the welding is divided into large package, first pour a large package of flux, in the small fire powder even on the top, by the way the edge of the mold point fire mouth to the point, and then cover the mold cover.
12、4. With the ignition of a point gun at the mouth of the grinding tool, (with the gloves on the ignition, the face not to look at the point of the fire, the lid is pressed with the pliers), it ignites instantaneously. The cable and the pipe are welded into a copper bump, and the welding is very strong.
13、5. Then fill the wound with a wound stick
14、6, use fire to heat up the wound piece, let the wound piece close to the mouth, fill the wound.焦作市立博轻合金股份有限公司
热卖中的镁阳极-镁阳极
焦作市立博轻合金股份有限公司，是一家以质量为中心生产的，价格忧，是广大客户的首选，可根据客户提供的阳极尺寸重量尺寸生产，按时交货。
在采购镁阳极的时候需提供规格，包装尺寸，需设计的时候提供保护的材料，年限，以及土壤电阻率，一系列参数，采购铝阳极锌阳极也是同的的，保护的位置材料成分，根据提供的一系列参数可报价生产。全心全意的对待每一位客户，公司理念持诚信互利共荣，以厚德载物有一份耕耘 ，就有一份收获。脚踏实地完成客户的一切需求，完美交货、快乐合作。